CRANKCASE/CRANKSHAFT/TRANSMISSION
Clean off any oil from the crankshaft journals.
Measure and record the crankshaft main journal
O.D.
SERVICE LIMIT: 52.976 mm (2.0857 in)
Calculate the main journal oil clearance.
SERVICE LIMIT: 0.07 mm (0.003 in)
If the clearance exceeds the service limit, select the
bearing.
BEARING SELECTION
Set the special tool and hydraulic press on the out-
side of the crankcase.
TOOL:
Driver, 57 mm
070MF-MEG0100
Press the main journal bearings toward the outside
DRIVER
of the crankcase.
BEARING
Measure and record the crankcase main journal I.D.
INDEX MARK
at between the main journal groove and crankcase
outer side end, and 90 degrees to the index mark.
SERVICE LIMIT: 58.070 mm (2.2862 in)
90°
12-15