Honda Transalp XL700V Manual page 455

HYDRAULIC BRAKE
Remove the bracket pin boot and pad spring from
the caliper.
Remove the caliper pin boot and pad retainer from
the bracket
Clean the retainer and bracket mating surfaces.
Place a shop towel over the pistons.
Do not use high
Position the caliper body with the piston facing
pressure air or bring
down and apply small squirts of air pressure to the
the nozzle too close
fluid inlet to remove the pistons.
the inlet.
Push the dust and piston seals in and lift them out.
Be careful not to
damage the piston
Clean the seal grooves, caliper cylinders and pis-
sliding surface.
tons with clean brake fluid.
15-26
BOOT
DUST SEAL
BOOT
PAD SPRING
PAD RETAINER
PISTON SEAL