Honda Transalp XL700V Manual page 236

SERVICE INFORMATION
GENERAL
• A hoist or equivalent is required to support the motorcycle when removing and installing the engine.
• A floor jack or other adjustable support is required to support and maneuver the engine.
• Do not support the engine using the engine oil filter or it will be damaged.
• When removing/installing the engine, tape the frame around the engine beforehand for frame protection.
• The following components require engine removal for servicing.
– Crankshaft (page 12-8)
– Transmission (Including gearshift drum/shift fork: page 12-19)
– Oil pump (page 4-5)
• The following components can be serviced with the engine in the frame.
– Cylinder head (page 8-13)
– Cylinder/piston (page 9-4)
– Throttle body (page 5-65)
– Water pump (page 6-14)
– Clutch/gearshift linkage (page 10-6)
– Alternator/starter clutch (page 11-4)
– Electric starter (page 19-6)
SPECIFICATIONS
Engine dry weight
Engine oil capacity at disassembly
Coolant capacity (radiator and engine)
TORQUE VALUES
Engine hanger nut
Engine hanger plate nut
Drive sprocket bolt
Starter motor cable terminal nut
Swingarm pivot nut
Gearshift pedal pinch bolt
Drive sprocket cover bolt
ITEM
53.9 N·m (5.5 kgf·m, 40 lbf·ft)
26.4 N·m (2.7 kgf·m, 19 lbf·ft)
10 N·m (1.0 kgf·m, 7 lbf·ft)
10 N·m (1.0 kgf·m, 7 lbf·ft)
88 N·m (9.0 kgf·m, 65 lbf·ft)
17.6 N·m (1.8 kgf·m, 13 lbf·ft)
13 N·m (1.3 kgf·m, 10 lbf·ft)
ENGINE REMOVAL/INSTALLATION
SPECIFICATIONS
58.7 kg (129.4 lbs)
2.9 liters (3.1 US qt, 2.6 Imp qt)
2.35 liters (2.48 US qt, 2.07 Imp qt)
U-nut
7-3