Honda Transalp XL700V Manual page 85

FRAME/BODY PANELS/EXHAUST SYSTEM
Install the muffler mounting bolts and collar.
Tighten the muffler mounting bolts to the specified
torque.
TORQUE: 39.2 N·m (4.0 kgf·m, 29 lbf·ft)
Tighten the muffler band bolt to the specified
torque.
TORQUE: 21 N·m (2.1 kgf·m, 15 lbf·ft)
Install the pillion step holder.
Install and tighten the bolts to the specified torque.
TORQUE: 26.5 N·m (2.7 kgf·m, 20 lbf·ft)
Install the lower exhaust pipe protector.
Install and tighten the bolts securely.
Install the following:
– Under cowl (page 2-13)
– Right side cover (page 2-4)
– Right front side cowl (page 2-9)
2-22
BAND BOLT
STEP HOLDER
EXHAUST PIPE PROTECTOR
BOLTS
BOLT/COLLAR
BOLT
BOLTS