Honda Transalp XL700V Manual page 427

REAR WHEEL/SUSPENSION
Install the pivot nut.
Tighten the pivot nut to the specified torque.
TORQUE: 88 N·m (9.0 kgf·m, 65 lbf·ft)
Install the swingarm pivot covers.
Install the cushion arm bolt and nut.
When installing the
cushion arm bolt,
Tighten the nut to the specified torque.
lift the drive chain
slider upper side. TORQUE: 64 N·m (6.5 kgf·m, 47 lbf·ft)
Install the collar and drive chain slider upper side
screw.
Tighten the screw to the specified torque.
TORQUE: 6 N·m (0.6 kgf·m, 4.4 lbf·ft)
14-28
PIVOT COVER
BOLT
PIVOT NUT
NUT
SCREW/COLLAR