Honda Transalp XL700V Manual page 410

ASSEMBLY
BEARING (6304UU)
DRIVEN FLANGE
COLLAR
DUST SEAL
DRIVEN SPROCKET
Place the wheel rim on the work bench.
Place the wheel hub in the center of the rim and
begin lacing with new spokes.
Adjust the wheel hub position so that the distance
from the wheel hub right end surface to the side of
rim is 10.5 ± 1.0 mm (0.41 ± 0.04 in) as shown.
TOOL:
Spoke wrench, 6.1 mm
TORQUE: 3.7 N·m (0.4 kgf·m, 2.7 lbf·ft)
Check the rim runout (page 14-7).
45 N·m (4.6 kgf·m, 33 lbf·ft)
O-RING
RUBBER DAMPERS
07JMA-MR60100
REAR WHEEL/SUSPENSION
42 N·m (4.3 kgf·m, 31 lbf·ft)
REAR BRAKE DISC
DUST SEAL
BEARING (6303UU)
DISTANCE COLLAR
BEARING (6203UU)
8 N·m (0.8 kgf·m, 5.9 lbf·ft)
REAR PULSER RING
10.5 ± 1.0 mm
(0.41 ± 0.04 in)
14-11