Honda Transalp XL700V Manual page 128

OIL PUMP ASSEMBLY
Dip all parts in clean engine oil.
DRIVE PIN
OUTER ROTOR
INNER ROTOR
DRIVE SHAFT
OIL PIPE
PIPE SEAL
Install the outer and inner rotors to the pump body.
Install the inner rotor with the grooved side facing
the pump cover.
Install the drive shaft and drive pin by aligning the
drive pin with the grooves in the inner rotor.
Place the washer into the inner rotor groove.
Install the dowel pins to the pump body.
13 N·m (1.3 kgf·m, 10 lbf·ft)
THRUST WASHER
O-RING
OIL PUMP COVER
LUBRICATION SYSTEM
OIL PUMP BODY
DOWEL PINS
O-RING
PACKING
RELIEF VALVE BODY
OIL STRAINER
INNER ROTOR
DRIVE PIN
WASHER
DRIVE SHAFT
INNER ROTOR
SNAP RING
SPRING
WASHER
PISTON
OUTER ROTOR
GROOVE
DOWEL PINS
OUTER ROTOR
4-9