FUEL SYSTEM (PGM-FI)
Place a new packing onto the fuel pump.
Always replace the
packing with a new
Push the front end of the packing to fit it on the fuel
one.
tank.
Install the fuel pump assembly as shown.
Be careful not to
damage the float
arm and fuel level
sensor by fuel tank
drain/breather pipes
and separator.
BREATHER PIPE
Align with the one of stud bolts and holes as shown.
Be careful not to
pinch the dirt and
Push the fuel pump assembly to mate the setting
debris between the
plate of the fuel pump assembly with the fuel tank.
fuel pump and
packing.
5-60
FUEL PUMP ASSEMBLY
DRAIN PIPE
SEPARATOR
FLOAT
PUSH
BREATHER PIPE
PACKING
Align