Honda Transalp XL700V Manual page 303

CLUTCH/GEARSHIFT LINKAGE
CLUTCH PLATE
Check the clutch plate for discoloration.
Replace the clutch
discs and plates as
Check the clutch plate warpage on a surface plate
a set.
using a feeler gauge.
SERVICE LIMIT: 0.30 mm (0.012 in)
CLUTCH CENTER
Check the clutch center for nicks, indentations or
abnormal wear caused by the clutch plates.
CLUTCH OUTER
Check the slot in the clutch outer for nicks, indenta-
tions or abnormal wear caused by the clutch discs.
Measure the clutch outer I.D.
SERVICE LIMIT: 32.09 mm (1.263 in)
CLUTCH OUTER GUIDE
Check the clutch outer guide for damage or abnor-
mal wear.
Measure the clutch outer guide I.D.
SERVICE LIMIT: 22.03 mm (0.867 in)
Measure the clutch outer guide O.D.
SERVICE LIMIT: 31.92 mm (1.257 in)
Calculate the clutch outer-to-outer guide clearance.
SERVICE LIMIT: 0.18 mm (0.007 in)
10-10