Honda Transalp XL700V Manual page 20

CLUTCH/GEARSHIFT LINKAGE
ITEM
Clutch lifter plate bolt
Clutch center lock nut
Shift drum stopper arm pivot bolt
Oil pump driven sprocket bolt
Primary drive gear bolt
Gearshift spindle return spring pin
Gearshift pedal pinch bolt
ALTERNATOR/STARTER CLUTCH
ITEM
Flywheel bolt
Stator bolt
Starter clutch torx bolt
Stator wire holder bolt
CRANKCASE/CRANKSHAFT/TRANSMISSION
ITEM
Crankcase bolt (8 mm)
Crank pin bearing cap nut
Oil seal setting plate bolt
Gearshift cam plate bolt
Transmission bearing setting plate
bolt
Cam chain tensioner setting plate bolt
Oil filter boss
FRONT WHEEL/SUSPENSION/STEERING
ITEM
Handlebar holder bolt
Handlebar lower holder nut
Throttle housing screw
Right handlebar switch screw
Spoke
Front axle
Front axle holder nut
Front brake disc bolt
Fork center bolt
Fork cap
Fork top bridge pinch bolt
Fork bottom bridge pinch bolt
Steering top thread
Steering stem nut
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
4 6
1 18
1 6
1 6
1 12
1 8
1 6
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
1 12
4 6
6 8
1 6
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
13 8
4 9
1 6
1 6
3 6
2 6
1 20
THREAD
Q'TY
DIA. (mm) N·m (kgf·m, lbf·ft)
4 8
2 8
2 5
2 4
36 BC 3.5
1 16
4 6
8 8
2 8
2 37
2 8
2 8
1 26
1 24
GENERAL INFORMATION
TORQUE
12 (1.2, 9)
128 (13.1, 94) Apply engine oil to the
threads and seating sur-
face.
Stake
12 (1.2, 9) Apply locking agent.
15 (1.5, 11) Apply locking agent.
88 (9.0, 65) Apply engine oil to the
threads and seating sur-
face.
23 (2.3, 17)
17.6 (1.8, 13)
TORQUE
157 (16.0, 116) Left hand thread
Apply engine oil to the
threads and seating sur-
face.
12 (1.2, 9) Apply locking agent.
30 (3.1, 22) Apply locking agent.
12 (1.2, 9) Apply locking agent.
TORQUE
23 (2.3, 17)
42 (4.3, 31) Apply engine oil to the
threads and seating sur-
face.
10 (1.0, 7) Apply locking agent.
12 (1.2, 9) Apply locking agent.
12 (1.2, 9) Apply locking agent.
12 (1.2, 9) Apply locking agent.
– See page 12-29
Apply locking agent to the
crankcase side threads.
TORQUE
27 (2.8, 20)
26.5 (2.7, 20)
4.2 (0.4, 3.1)
0.9 (0.1, 0.7)
3.7 (0.4, 2.7)
64 (6.5, 47)
12 (1.2, 9)
42 (4.3, 31) ALOC bolt; replace with a
new one.
20 (2.0, 15) Apply locking agent.
22 (2.2, 16)
26 (2.7, 19)
34 (3.5, 25)
See page 13-34
103 (10.5, 76)
REMARKS
REMARKS
REMARKS
REMARKS
1-15