Throttle Body - Honda Transalp XL700V Manual

Install and tighten the bolt/washer securely.
Lower the fuel tank (page 3-5).
Install the wire harness cover (page 2-10).

THROTTLE BODY

REMOVAL
• Bending or twisting the control cables will impair
smooth operation and could cause the cables to
stick or bind, resulting in loss of vehicle control.
• Before disconnecting the fuel hose, release the
fuel pressure (page 5-54).
Relieve the fuel pressure and disconnect the quick
connect fitting (page 5-54).
Remove the air cleaner housing (page 5-62).
Loosen the throttle cable lock nut and adjusters then
disconnect the throttle cables from the throttle
drum and cable bracket.
Disconnect the throttle body sub harness 14P (Gray)
connector and CMP sensor 2P (Natural) connector.
FUEL SYSTEM (PGM-FI)
BOLT/WASHER
THROTTLE CABLES
ADJUSTERS LOCK NUT
2P (NATURAL) CONNECTOR
14P (GRAY) CONNECTOR
THROTTLE DRUM
5-65