Honda Transalp XL700V Manual page 469

HYDRAULIC BRAKE
INSTALLATION
Install the joint pin.
Secure the joint pin using a new the cotter pin.
Install the rear master cylinder to the inside of
frame.
Hook the rear brake light switch spring.
Install the step holder, swingarm pivot nut and step
holder bolt.
Tighten the swingarm pivot nut and step holder bolt
to the specified torque.
TORQUE:
Swingarm pivot nut: 88 N·m (9.0 kgf·m, 65 lbf·ft)
Step holder bolt:
Install the swingarm pivot covers.
15-40
63.7 N·m (6.5 kgf·m, 47 lbf·ft)
MASTER CYLINDER
STEP HOLDER
COVERS
COTTER PIN
JOINT PIN
Hook
NUT
BOLT