Oil Pressure Check; Oil Pump - Honda Transalp XL700V Manual

OIL PRESSURE CHECK

Remove the EOP switch (page 20-19).
Connect an oil pressure gauge attachment and
gauge to the EOP switch hole.
TOOLS:
Oil pressure gauge set
Oil pressure gauge attachment 07510-4220100 or
Check the oil level and add the recommended oil if
necessary (page 3-12).
Start the engine and check the oil pressure at 5,000
-1
(rpm).
min
OIL PRESSURE:
294 kPa (3.0 kgf/cm
(100°C/212°F)
Stop the engine and remove the special tools.
Install the EOP switch (page 20-19).

OIL PUMP

REMOVAL
Separate the crankcase (page 12-7).
Remove the bolts, pressure relief valve cover and oil
pump assembly from the left crankcase.
Remove the dowel pin, collars and O-rings.
07506-3000001 or
equivalent commer-
cially available
equivalent commer-
cially available
2 -1
, 43 psi) at 6,000 min (rpm)
LUBRICATION SYSTEM
OIL PRESSURE GAUGE
ATTACHMENT
OIL PUMP ASSEMBLY
COVER
COLLARS/O-RINGS
BOLTS
DOWEL PIN
4-5