Honda Transalp XL700V Manual page 353

CRANKCASE/CRANKSHAFT/TRANSMISSION
Install the bearing on the shift drum.
Install the dowel pin into the shift drum hole.
Install the gearshift cam plate by aligning the hole
on the cam plate with the dowel pin.
Clean and apply locking agent to the gearshift cam
plate bolt (page 1-18).
Install and tighten the bolt to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
12-24
BEARING
DRUM
CAM PLATE
CAM PLATE
DOWEL PIN
Align
BOLT