Remove the clutch outer guide.
INSPECTION
LIFTER PLATE BEARING
Turn the inner race of the bearing with your finger.
The bearing should turn smoothly and quietly.
Also check that the bearing outer race fits tightly in
the lifter plate.
Remove and discard the bearing if the race does not
turn smoothly and quietly, or if it fits loosely in the
lifter plate.
CLUTCH SPRING
Check the clutch spring free length.
Replace the clutch
springs as a set.
SERVICE LIMIT: 41.7 mm (1.64 in)
CLUTCH DISC
Replace the clutch discs for signs of scoring or dis-
Replace the clutch
coloration.
discs and plates as
a set.
Measure the clutch disc thickness.
SERVICE LIMITS: Disc A: 2.3 mm (0.09 in)
Disc B: 2.6 mm (0.10 in)
Disc C: 2.3 mm (0.09 in)
CLUTCH/GEARSHIFT LINKAGE
CLUTCH OUTER GUIDE
10-9