Honda Transalp XL700V Manual page 377

FRONT WHEEL/SUSPENSION/STEERING
Loosen the axle holder nuts.
Loosen the front axle.
Support the motorcycle securely and raise the front
wheel off the ground.
Remove the axle and front wheel.
• Be careful not to damage the wheel speed sensor
when removing the wheel.
Remove the side collars.
INSPECTION
AXLE
Set the front axle in V-blocks.
Turn the axle and measure the runout using a dial
indicator.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT: 0.2 mm (0.01 in)
WHEEL RIM
Check the rim runout by placing the wheel in a true-
ing stand.
Spin the wheel slowly and read the runout using a
dial indicator.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMITS:
Radial: 2.0 mm (0.08 in)
Axial:
13-16
2.0 mm (0.08 in)
AXLE
COLLARS
HOLDER NUTS