HYDRAULIC BRAKE
REAR MASTER CYLINDER
REMOVAL
Remove the battery tray (page 17-6).
Drain the brake fluid from the hydraulic system.
– XL700V (page 15-7)
– XL700VA (page 15-11)
Remove the brake hose oil bolt, sealing washers
When removing the
and brake hose.
oil bolt, cover the
end of the hose to
prevent
contamination.
Remove the bolt and rear master cylinder assembly.
Remove the swingarm pivot covers.
Remove the swingarm pivot nut and step holder
bolt.
• Push the swingarm pivot bolt into the frame, do
not remove it.
15-34
OIL BOLT
MASTER CYLINDER
COVERS
SEALING WASHERS
BOLTS
NUT
BOLT