Honda Transalp XL700V Manual page 491

ANTI-LOCK BRAKE SYSTEM (ABS)
3. Speed Sensor Input Voltage Inspection
Disconnect the rear wheel speed sensor/VS sen-
sor 2P (Orange) connector.
Measure the voltage at the rear wheel speed
sensor/VS sensor 2P (Orange) connector of the
wire harness side with the ignition switch turned
ON.
Connection: Pink/white (+) – Green/red (–)
Is there battery voltage?
YES
NO
4. Speed Sensor Line Open Circuit Inspection
Turn the ignition switch OFF.
Disconnect the ABS modulator 26P connector.
Check for continuity at the Pink/white and Green/
red terminals between rear wheel speed sensor/
VS sensor 2P (Orange) connector and ABS mod-
ulator 26P connector.
Connection: Pink/white – Ground
Is there continuity?
NO
YES
5. Speed Sensor Line Short Circuit Inspection
Connect the ABS modulator 26P connector.
Check for continuity between the rear wheel
speed sensor/VS sensor 2P (Orange) connector
of the wire harness side and ground.
Connection: Pink/white – Ground
Is there continuity?
YES
NO
6. Failure Reproduction With A New Speed Sensor
Replace the rear wheel speed sensor/VS sensor
with a new one (page 16-23).
Connect the ABS modulator 26P connector.
Erase the problem code (page 16-9).
Test ride the motorcycle above 5 km/h (3 mph).
Retrieve the problem code (page 16-8).
Dose the indicator blink 13 or 14 times?
NO
YES
16-16
– Faulty rear wheel speed sensor/VS sen-
sor
– GO TO STEP 4.
Green/red – Ground
– Open circuit in wire between the ABS
modulator and rear wheel speed sen-
sor/VS sensor
– GO TO STEP 5.
– Short circuit in Pink/black wire
– GO TO STEP 6.
– Faulty removed rear wheel speed sen-
sor/VS sensor
– Faulty ABS modulator
REAR WHEEL SPEED SENSOR/
VS SENSOR 2P (ORANGE) CONNECTOR
(Wire side/female terminal)
G/R
ABS MODULATOR 26P CONNECTOR
(Wire side/female terminal)
G/R
REAR WHEEL SPEED SENSOR/
VS sensor 2P (ORANGE) CONNECTOR
(Wire side/male terminal)
REAR WHEEL SPEED SENSOR/
VS sensor 2P (ORANGE) CONNECTOR
(Wire side/male terminal)
ABS INDICATOR
P/W
P/W
P/W