Honda Transalp XL700V Manual page 495

ANTI-LOCK BRAKE SYSTEM (ABS)
PROBLEM CODE 61 or 62 (Power
Circuit)
1. ABS Power Input Line Short Circuit Inspection
Disconnect the ABS modulator 26P connector.
Check for continuity between the ABS modulator
26P connector of the wire harness side and
ground.
TOOL:
Test probe
Connection: Red/brown – Ground
Is there continuity?
NO
YES
2. ABS Power Input Line Open Circuit Inspection
Measure the voltage between the ABS modula-
tor 26P connector of the wire harness side and
ground with the ignition switch turned ON.
TOOL:
Test probe
Connection: Red/brown (+) – Ground (–)
Is there battery voltage?
NO
YES
3. Failure Reproduction
Turn the ignition switch OFF.
Connect the ABS modulator 26P connector.
Erase the problem code (page 16-9).
Test ride the motorcycle above 5 km/h (3 mph).
Retrieve the problem code (page 16-8).
Does the indicator blink 61 or 62 times?
YES
NO
16-20
07ZAJ-RDJA110
– GO TO STEP 2.
– Short circuit in Red/brown, Red/black
and/or Red wires
07ZAJ-RDJA110
– • Open circuit in Red/brown wire
between the fuse box and ABS mod-
ulator
• Loose or poor contact on the connec-
tor
• Blown the "ABS MAIN" fuse (10 A)
– GO TO STEP 3.
– Faulty ABS modulator
– Power circuit is normal (temporary fail-
ure).
R/Br
ABS MODULATOR 26P CONNECTOR
(Wire side/female terminal)
R/Br
ABS MODULATOR 26P CONNECTOR
(Wire side/female terminal)
ABS INDICATOR