Brake Pad Replacement; Brake Pad/Disc - Honda Transalp XL700V Manual

BRAKE PAD/DISC

BRAKE PAD REPLACEMENT

FRONT (XL700V)
Push the caliper piston all the way in to allow instal-
Check the brake
lation of new brake pads.
fluid level in the
reservoir as this
operation causes
the level to rise.
Remove the pad pin plug.
Loosen the pad pin.
Pull the pad pin out of the caliper body while push-
ing in the pads against the pad spring.
Remove the brake pads.
Install new brake pads into the caliper so their ends
Make sure the pad
rest into the pad retainer on the bracket properly.
spring is installed
correctly.
HYDRAULIC BRAKE
PAD PIN
PAD PIN PLUG
PADS
PADS
RETAINER
15-17