Honda Transalp XL700V Manual page 536

Install the armature to the rear cover assembly.
Install a new O-ring to the starter motor case.
Install the starter motor case with its groove to the
stopper on the rear cover assembly.
The coil may be damaged if the magnet pulls the
armature against the case.
Install a new O-ring to the starter motor case.
Install the front cover to the starter motor case.
• When installing the front cover, take care to pre-
vent damaging the oil seal lip with the armature
shaft.
Align the index marks on the front cover, starter
motor case and rear cover.
ELECTRIC STARTER
ARMATURE
REAR COVER ASSEMBLY
Align STARTER MOTOR CASE
O-RING
O-RING
FRONT COVER
Align
19-13