Honda Transalp XL700V Manual page 240

Loosen the rear axle nut.
Turn the drive chain adjusting nuts and make drive
chain slack fully (page 3-17).
Remove the bolts, fixing plate and drive sprocket.
Remove the swingarm pivot covers.
Remove the bolts and under cowl stay from the
engine mounting plate.
Place a floor jack or other adjustable support under
The jack height
the engine.
must be continually
adjusted to relieve
Remove the following:
stress for bolt
– Engine hanger plate nuts
removal.
– Engine hanger plate bolts
– Horn stay
– Under cowl stay mounting plate
– Collar
– Engine hanger plate
ENGINE REMOVAL/INSTALLATION
BOLT
PIVOT COVERS
BOLTS
COLLAR
ENGINE HANGER PLATE
MOUNTING PLATE
SPROCKET
FIXING PLATE
UNDER COWL STAY
BOLT/NUT
7-7