Primary Drive Gear - Honda Transalp XL700V Manual

CLUTCH/GEARSHIFT LINKAGE

PRIMARY DRIVE GEAR

REMOVAL
Remove the clutch (page 10-6).
Remove the CKP sensor bolts.
Remove the CKP sensor and grommets.
Temporarily install the clutch outer guide, oil pump
drive sprocket and clutch outer onto the mainshaft
(page 10-16).
Hold the primary drive gear using the special tool
and remove the primary drive gear bolt and washer.
TOOL:
Gear holder, 2.5
Remove the gear holder and temporarily installed
parts.
Remove the CKP sensor rotor and primary drive
gear.
INSPECTION
Check the CKP sensor rotor for wear or damage.
10-12
CKP SENSOR
07724-0010100
CKP SENSOR ROTOR
BOLTS
GEAR HOLDER BOLT/WASHER
PRIMARY DRIVE GEAR
PRIMARY DRIVE GEAR
GROMMETS