O 2 Sensor - Honda Transalp XL700V Manual

FUEL SYSTEM (PGM-FI)
Install the PAIR check valve to the cylinder head
cover.
Install the PAIR check valve cover.
Install and tighten the bolts to the specified torque.
TORQUE: 5.2 N·m (0.5 kgf·m, 3.8 lbf·ft)
Install the cooling fan (page 6-13).
Front:
Install the PAIR control solenoid valve (page 5-83).
Rear:
O SENSOR
2
REMOVAL
• Handle the O
• Do not get grease, oil or other materials in the O
sensor air hole.
• Do not use an impact wrench while removing or
installing the O
• Be careful not to damage the sensor wire.
Remove the exhaust system (page 2-14).
Do not service the
O sensor while it is
2
Remove the O
hot.
TOOL:
O sensor wrench
2
5-84
sensor with care.
2
sensor.
2
sensor using the special tool.
2
07LAA-PT50101
Front: PAIR CHECK VALVES
Front: BOLTS
COVERS
2
O SENSOR
2
Rear:
Rear:
O SENSOR WRENCH
2