Honda Transalp XL700V Manual page 372

Remove the inner weight assembly from the han-
dlebar.
Discard the retainer ring.
Check the rubber cushions for wear or damage.
Install a new retainer ring onto the inner weight.
Insert the inner weight assembly into the handlebar
by hooking the retainer ring tabs with the holes in
the handlebar.
INSTALLATION
• Route the cable, hose and wires properly (page
1-21).
Check the bushings for abnormal wear or damage.
Install the handlebar lower holders, setting plates,
washers and nuts onto the top bridge.
FRONT WHEEL/SUSPENSION/STEERING
INNER WEIGHT
RUBBER CUSHIONS
INNER WEIGHT ASSEMBLY
BUSHINGS
LOWER HOLDERS
RETAINER RING
Hook RETAINER RING
HOLE
TAB
SETTING PLATES
NUTS/ WASHERS
13-11