CAMSHAFT HOLDER INSPECTION
Check the camshaft journal surfaces of each cam-
shaft holder for scoring, scratches or evidence of
insufficient lubrication.
CYLINDER HEAD REMOVAL
• The cylinder head service can be done with the
engine in the frame.
• The front cylinder head uses the same service
procedure as the rear cylinder head.
Remove the following:
– Cylinder head cover (page 8-6)
– Camshaft (page 8-8)
– CMP sensor (page 5-73)
Drain the coolant by removing the water pump
drain bolt (page 6-7).
Remove the radiator lower mounting bolts and
Front cylinder head
swing the radiator to forward.
only:
Loosen the band screw and disconnect the water
hose.
CYLINDER HEAD/VALVES
JOURNALS
BOLTS
SCREW
HOSE
8-13