Injector - Honda Transalp XL700V Manual

Connect the throttle cables to the throttle drum and
cable bracket.
Adjust the throttle grip freeplay (page 3-6).
Install the air cleaner housing (page 5-64).

INJECTOR

INSPECTON
Start the engine and let it idle.
Confirm the injector operating sounds with a sound-
ing rod or stethoscope.
REMOVAL
• Before disconnecting fuel feed hose, relieve pres-
sure from the system (page 5-54).
• The fuel feed hose is made of the resin. Be care-
ful not to bend or fold the fuel feed hose.
Relieve the fuel pressure and disconnect the quick
connect fitting (page 5-54).
Remove the air cleaner housing (page 5-62).
Clean around the injector base and fuel hose quick
connector with compressed air before removing the
injector, and be sure that no debris is allowed to
enter into the throttle body.
Disconnect the injector 2P (Gray) connector.
FUEL SYSTEM (PGM-FI)
THROTTLE CABLES
BRACKET
SOUNDING ROD
2P (GRAY) CONNECTOR
THROTTLE DRUM
5-69