NEC Univerge SV8100 Features And Specifications Manual page 197

UNIVERGE SV8100
Program
Program Name
Number
13-01-01 Speed Dialing Function Setup –
Speed Dialing Auto Outgoing Call
Mode
13-04-01 Speed Dialing Number and Name
– Speed Dialing Data
14-01-04 Basic Trunk Data Setup –
Transmit Gain Level for
Conference and Transfer Calls
14-01-05 Basic Trunk Data Setup – Receive
Gain Level for Conference and
Transfer Calls
14-06-01 Trunk Group Routing – Priority
Order Number
15-07-01 Programmable Function Keys
16-02-01 Department Group Assignment
for Extensions
SV8100 Features and Specifications Manual
Description/Comments
Determine if dialing an Speed Dialing
number will dial an outside number
(seizing a trunk as assigned in
Program 13-05) or an Intercom
number (0 = Trunk Dialing Mode, 1 =
Extension Dialing Mode).
Enter the Common and Group
Speed Dialing numbers and names
which are to be used for Trunk-to-
Trunk Forwarding.
CODEC gain set at 0 dB [Program
14-01-04 = 32 (CODEC Gain Type
2)] can be used to set the transmit
CODEC gain type for multiline
Conference or transferred calls.
CODEC gain set at 0 dB [Program
14-01-04 = 32 (CODEC Gain Type
2)] can be used to set the transmit
CODEC gain type for multiline
Conference or transferred calls.
Used to set the priority order number
1~4.
Assign an Automatic Forwarding at
Department Group key (58) or a
Delayed Forwarding at Department
Group key (59) for an extension
user.
Set up the Department Group called
by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in 23-
02.
Assigned Data
0 = Trunk Outgoing
Mode
1 = Intercom Outgoing
Mode
(default = 0)
#
1~9, 0, ,
Pause (Press line key 1)
Recall/Flash (Press line
key 2)
@ = Code to wait for
answer supervision in
ISDN (Press line key 3)
(maximum 24 digits)
(default not assigned)
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
1~63(-15.5dB ~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
0 = Not Specify1~100 :
(Trunk Group
Number)1001~1100 :
(1000 + Route Table
Number)
Default:
Route 1, Order Number
1 = 1 (Trunk Group 1)
Order Numbers 2, 3, 4 =
0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0 (Not
Specified).
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Department Groups
1-64
Priority 1-512
Default = All extensions
in Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 512 priority = 512
Issue 1.0
Level
1 2 3
2 - 173