NEC Univerge SV8100 Features And Specifications Manual page 193

UNIVERGE SV8100
Program
Program Name
Number
14-01-13 Basic Trunk Data Setup – Loop
Supervision
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-11-12 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding Off-Premise
(External Call Forwarding)
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
SV8100 Features and Specifications Manual
Description/Comments
Enable (1) loop supervision for
each trunk that should be able to
use Call Forwarding Off-Premise.
Use to assign functions to multiline
terminal line keys.
Assign a Class of Service (1~15) to
extensions.
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless of
this program setting.
Turns Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
In an extensions Class of Service,
turns On (1) or Off (0) setting up
Call Forwarding Off-Premise at the
extension.
Turns On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
Allows a busy extension ability to
Manually (0) or Automatically (1)
receive Off-Hook signals.
Assigned Data
1
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 1.0
Level
2 3
2 - 169