NEC Univerge SV8100 Features And Specifications Manual page 198

Issue 1.0
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group Transfer)
24-05-01 Department Group Transfer
Target Setup
Trunk-to-Trunk Forwarding – DID (3) Trunk Forwarding Using DID Translation Table
Refer to Direct Inward Dialing (DID) for additional DID programming.
Program
Program Name
Number
22-11-05 DID Translation Table Number
Conversion – Transfer
Destination Number 1
22-11-06 DID Translation Table Number
Conversion – Transfer
Destination Number 2
2 - 174
Description/Comments
Assign a Class of Service (1~15) to
extensions.
Turns On (1) or Off (0) the ability of
an extension in a Department Group
to use the Trunk-to-Trunk
Forwarding service codes.
Assign the Speed Dialing number bin
to be used as the destination of the
Department Group Trunk-to-Trunk
Forwarding.
Description/Comments
For each DID Translation Table
entry (1-2000), specify the first and
second Transfer Destinations if the
callers receives a busy or no answer
(action defined in Program 22-11-
04)
If the Transfer Destinations are
busy or receive no answer,
those calls are transferred to
the final transfer destination
(Program 22-10).
UNIVERGE SV8100
Assigned Data
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~1999
(default = 1999)
Assigned Data
1
0 = No Setting
1~100 = Incoming
Group
101 = (Not Used)
102 = In-Skin/External
Voice Mail or In-Mail
201~264 = Extension
Group
400 = Valid Extension
Number
401 = DISA
501~548 = DISA/VRS
Message
1000~1999 = Speed
Number (000~999)
(default = 0)
Call Forwarding, Off-Premise
Level
1 2 3
Level
2 3