NEC Univerge SV8100 Features And Specifications Manual page 216

Issue 1.0
Related Features
Callback
Off-Hook Signaling
Programmable Function Keys
Transfer
Trunk Queuing/Camp On
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-11-23 Service Code Setup (for Setup/
Entry Operation) – Second Call
for DID/DISA/DIL
11-12-04 Service Code Setup (for Service
Access) – Set Camp-On
11-12-05 Service Code Setup (for Service
Access) – Cancel Camp-On
11-12-47 Service Code Setup (for Service
Access) – Call Waiting Answer/
Split Answer
11-16-05 Single Digit Service Code Setup
– Camp-On
15-02-06 Multiline Telephone Basic Data
Setup – Hold Key Operating
Mode
2 - 192
Description/Comments
This service code enables Second
Call to each extension when
Program 20-09-01 (Second Call) is
set to 0 (disable).
Customize the Service Code, which
is to be used for setting Camp-On.
Customize the Service Code, which
is to be used for cancelling Camp-
On.
If required, use this program to
change the code users dial to Split
while on a call.
Customize the 1-digit Service Code
used for setting Camp-On.
Use this option to set the function of
the Multiline Hold key. Hold can
activate normal Hold or Exclusive
Hold.
UNIVERGE SV8100
Assigned Data
1
MLT
(default = 679)
MLT, SLT
(default = 750)
MLT, SLT
(default = 770)
SLT
(default = 794)
#
(default = )
0 = Normal (Common)
1 = Exclusive Hold
(default = 0)
Call Waiting/Camp-On
Level
2 3