NEC Univerge SV8100 Features And Specifications Manual page 166

Issue 1.0
Program
Program Name
Number
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
24-02-13 System Options for Transfer –
Hook Flash Sending Timer When
the System Answers
Automatically
24-09-06 Call Forward Split Settings – Call
Forwarding Destination for CTX/
PBX for All Call, No Answer
24-09-07 Call Forward Split Settings – Call
Forwarding Destination for CTX/
PBX for Busy
2 - 142
Description/Comments
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless of
this program setting.
Turns Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
Turns On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
Allows a busy extension ability to
Manually (0) or Automatically (1)
receive Off-Hook signals.
Set the time the system waits
before sending the hookflash for the
Centrex Transfer after answering
the call.
Use to assign Call Forwarding Type
and the destination numbers for
CTX/PBX all call, no answer.
Use to assign Call Forwarding Type
and the destination numbers for
CTX/PBX busy calls.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~64800 (seconds)
(default = 2)
1~9, 0, #, , R, @
(Up to 24 digits)
(default not assigned)
1~9, 0, #, , R, @
(Up to 24 digits)
(default not assigned)
Call Forwarding – Centrex
Level
2 3