NEC Univerge SV8100 Features And Specifications Manual page 162

Issue 1.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-09-06 Class of Service Options
(Incoming Call Service) –
Incoming Time Display
20-13-36 Class of Service Options
(Supplementary Service) – Call
Duration Timer Display
21-01-03 System Options for Outgoing
calls – Trunk Interdigit Time
(External)
Operation
To time your trunk calls:
1. Place a trunk call.
The timer starts automatically.
2 - 138
Description/Comments
Assign a Class of Service (1~15) to
extensions.
If this option is set to 1, the
Incoming Call Time is displayed on
the multiline terminals LCD while
the telephone is ringing.
In an extension Class of Service,
turns On (1) or Off (0) a Call Timer
for the extension.
The time the system waits for this
time to expire before starting the
Call Timer.
UNIVERGE SV8100
Assigned Data
1
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for COS
01~15)
0 = Off
1 = On
(default = 1 for COS
01~15)
0~64800 (seconds)
(default = 5 seconds)
Call Duration Timer
Level
2 3