Table of Contents
Advertisement
Engine Removal/lnstallation
2. Remove the strut brace.
Make sure iacks and safety stands ate placed plopel-
ly and hoist brackets are attached to the correct po-
sitions on the engine {see section 11,
Make sure the car will not rollolt stands and latl while
you are wgrking under it.
8 x 1 . 2 5 m m
24 N.m {2.4 kgf.m,
17 tbf.tt)
CAUTION:
.
Use fender covers to avoid damaging painted sur-
faces.
Unplug the wiring connectors carelully while holding
the coupler and the connector portion to avoid d8m-
age.
Mark all wiring and hoses to avoid misconnection.
Also. be sure that they do not contact other wiring
or hoses, or intedere with other parts.
NOTE: Anti-theft radios have a coded theft protection cir-
cuit. Be sure to get the customer's code number betore
-
Disconnecting the battery.
-
R e m o v i n g t h e N o . 3 2 ( 7 . 5 A ) f u s e f r o m t h e u n d e r
hood fuse/relay box.
Removing the radio
After service, reconnect power to the radio and turn it
on. When the word "CODE" is displayed, enter the cus
tomer's 5-digit code to restore radio operation.
1. Remove the hood (see section 20).
3 . Disconnect the battery negative terminal first, then
t h e p o s i t i v e t e r m i n a l .
Disconnect the battery cables Irom the under-hood
Iuse/relay box and under hood ABS {use/relay box.
6 x 1 . 0 m m
9.8 N.'4 (1 .0 kgf .m,
7.2 rbf.ft)
( c o n t ' d l
STRUT BRACE
BAITERY CABLES
5-3
Advertisement
Table of Contents
Troubleshooting
