Dell Force10 S2410-01-10GE-24P Command Reference Manual page 483

Group Address — The IP address of the multicast group
Last Reporter — The IP address of host that last sent a membership report for the current group, on the
network attached to the IGMP-Proxy interface (upstream interface)
Up Time (in secs) — The time elapsed since last created
Member State — The status of the entry. Possible values are:
IDLE_MEMBER — The interface has responded to the latest group membership query for this group.
DELAY_MEMBER — The interface is going to send a group membership report to respond to a group
membership query for this group.
Filter Mode — The possible values are Include or Exclude.
Sources — The number of sources attached to the multicast group
Group Source List — The list of IP addresses of the sources attached to the multicast group
Expiry Time — Time left before a source is deleted
Related
ip igmp (global)
Commands
ip igmp (VLAN)
ip igmp-proxy
Sets the administrative mode of IGMP in the router to active.
Sets the administrative mode of IGMP for the selected VLAN to active
When used without parameters, this command enables/disables the IGMP Proxy on the
reset-status
router. When used with the
interface status parameters of the IGMP Proxy router. When used with
unsolicit-report-interval
, this command sets the unsolicited report interval for the
IGMP Proxy router.
keyword, this command resets the host
IP Multicast Commands | 483