Show Vlan Association Subnet - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Example Figure 7-45. Output of the show vlan association mac Command
Force10#show vlan association mac
MAC Address
-----------------------
00:06:11:11:11:11:11:11
00:07:11:12:13:14:15:16
Force10-S50V #show vlan association mac 11:11:11:11:11:11
MAC Address
-----------------------
00:06:11:11:11:11:11:11
Related
vlan association mac
Commands
vlan association
subnet
interface vlan

show vlan association subnet

This command displays the information about either all IP subnet-based VLANs or the VLAN
associated with a specific IP address and mask.
show vlan association subnet [ ipaddr netmask ]
Syntax
Parameters
ipaddr netmask
Mode Privileged Exec
Command
Version 2.5.1
History
Examples of using the show vlan association subnet command, with and without the ipaddr
Usage
Information
netmask
VLAN ID
-------
6
7
VLAN ID
-------
6
Configures a VLAN by associating the VLAN with a set of MAC addresses.
Configures a VLAN by associating the VLAN with an IP address and subnet.
Creates a VLAN or selects an already-created VLAN.
Note: The S50V and S25P support IP subnet-based VLANs. The original S50 does
not.
(OPTIONAL) For
mask to be used for retrieving information about the associated VLAN.
Introduced
variables, are shown in Figure
ipaddr netmask
and
7-46.
, enter the IP address and subnet
VLAN Commands | 137