Dell Force10 S2410-01-10GE-24P Command Reference Manual page 330

cos-queue max-bandwidth
Syntax
Modes
no cos-queue max-bandwidth
Syntax
Mode
cos-queue min-bandwidth
Syntax
Command
History
Modes
cos-queue random-detect
Syntax
Modes
| Quality of Service (QoS) Commands
330
This command specifies the maximum transmission bandwidth limit for each interface queue. Also
known as rate shaping, this has the effect of smoothing temporary traffic bursts over time so that the
transmitted traffic rate is bounded. The total number of queues supported per interface is platform
specific.
Oen6HWEWEu, G6r o.Aa.Ciu <bw-0> <bw-1> ... <bw-n>
Global Config and Interface Config
This command restores the default for each queue's maximum bandwidth value.
no cos-queue max-bandwidth
Global Config and Interface Config
This command specifies the minimum transmission bandwidth guarantee for each interface queue.
cos-queue min-bandwidth
The no cos-queue min-bandwidth command restores the default for each queue's minimum
bandwidth value.
A value from 0-100 (percentage of link rate) must be specified for each queue, with 0, for example,
indicating no guaranteed minimum bandwidth. The sum of all values entered must not exceed 100.
Version 2.5.1
Global Config; Interface Config;
This command activates weighted random early discard (WRED) for each specified queue on the
interface. Specific WRED parameters are configured using the 'random-detect queue-parms' and the
'random-detect exponential-weighting-constant' commands.
The no version of this command disables WRED, thereby restoring the default tail drop operation for
the specified queues on the interface.
[no] cos-queue random-detect <queue-id-1> [<queue-id-2> ... <queue-id-n>]
Global Config and Interface Config
bw-0 bw-1 ... bw-n
Interface Port Channel Config mode added
Interface Port Channel Config