Dell Force10 S2410-01-10GE-24P Command Reference Manual page 318

Syntax
Default
Mode
spanning-tree hello-time
Syntax
Default
Mode
Command
History
Related
Commands
spanning-tree max-age
Syntax
Default
| Spanning Tree (STP) Commands
318
The no version of this command sets the Bridge Forward Delay parameter for the common and
internal spanning tree to the default value, in other words, 15.
[no] spanning-tree forward-time 4-30
15
Global Config
This command sets the Admin Hello Time parameter to a new value for the common and internal
spanning tree.
spanning-tree hello-time 1-10
The hello time value is in whole seconds within a range of 1 to 10 with the value being less than or
equal to "(Bridge Max Age / 2) - 1".
no spanning-tree hello-time
The
common and internal spanning tree to the default value.
2
Interface
Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such
as (conf-if-range-vlan 10-20)#.
Version 2.3 Added Interface Range mode.
interface Identifies an interface and enters the Interface Config mode.
interface range Defines an interface range and accesses the Interface Range mode
show spanning-tree Displays the settings and parameters for a specific switch port within the common
interface and internal spanning tree
show spanning-tree
This command sets the Bridge Max Age parameter to a new value for the common and internal
spanning tree. The max-age value is in seconds within a range of 6 to 40, with the value being less than
or equal to "2 times (Bridge Forward Delay - 1)".
The no version of this command sets the Bridge Max Age parameter for the common and internal
spanning tree to the default value, in other words, 20.
spanning-tree max-age
6-40
no spanning-tree max-age
20
command sets the admin Hello Time parameter for the