Ip Http Secure-Server Enable; Ip Http Server Enable - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Mode
Command
History

ip http secure-server enable

Syntax
Default
Mode
Command
History

ip http server enable

Syntax
Default
Mode
Command
History
Related
Commands
| Security Commands
214
Global Config
Version 2.5.1
Unsupported: The
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.
This command is used to enable the secure socket layer for secure HTTP.
The no version of this command is used to disable the secure socket layer for secure HTTP.
Note:
This command
will start. See
s50-secure-management.pdf at (log-in required):
https://www.force10networks.com/csportal20/KnowledgeBase/Documentation.aspx
[no] ip http secure-server enable
disabled
Global Config
Version 2.5.1
Unsupported: The
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode and added
enable
This command enables access to the switch through the Web User Interface (Web UI) of SFTOS. When
access is enabled, the user can log in to the switch from the Web UI.
[no] ip http server enable
Use no ip http server enable to disable access to the switch through the Web UI. When access is
disabled, the user cannot login to the switch's Web server. Disabling the Web UI takes effect
immediately. All interfaces are affected.
enabled
Global Config
Version 2.5.1
Unsupported: The
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode and added
enable
ip address (management)
SFTOS
Web UI is not supported in v. 2.5.1 or 2.5.2.
requires keys/certificates to be generated offline before the service
SFTOS
Web UI is not supported in v. 2.5.1 or 2.5.2.
to the command.
SFTOS
Web UI is not supported in v. 2.5.1 or 2.5.2.
to the command.
Configures the IP address of the management interface.