Dell Force10 S2410-01-10GE-24P Command Reference Manual page 298

Related
Commands
port-channel enable all (global)
Syntax
Mode
Command
History
port-channel enable (interface)
Syntax
Mode
Command
History
Related
Commands
port-channel linktrap
Syntax
Default
Mode
| LAG/Port Channel Commands
298
show interfaces Displays an overview of all port channels (LAGs) on the switch or details on the
port-channel selected LAG.
addport Add a port to a LAG. LAG ports must be physical ports, not other LAGs.
This command enables the administrative mode for all port channel (LAGs).
The no version of this command disables all port channels (LAGs).
port-channel enable all
Global Config
Version 2.3
This command enables the selected port channel (LAG).
The no version of this command disables the selected port channel (LAG).
[no] port-channel enable
Interface Config
Version 2.3
interface
This command enables link trap notifications for all port channels (LAGs) or for a selected port
channel.
The no version of this command disables link trap notifications for the selected port channel.
[no] port-channel linktrap {unit/slot/port | all}
The interface is a logical unit/slot/port for a configured port channel.
The option all sets every configured port channel with the same administrative mode setting.
enabled
Global Config
adminmode enable
Replaced with
adminmode enable
Replaced with
Accesses the Interface Config mode for the selected port channel (LAG).
.
.