Tacacs+ Commands - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Access Requests—The number of RADIUS Access-Request packets sent to this server. This number
does not include retransmissions.
Access Retransmission—The number of RADIUS Access-Request packets retransmitted to this
RADIUS authentication server.
Access Accepts—The number of RADIUS Access-Accept packets, including both valid and invalid
packets, which were received from this server.
Access Rejects—The number of RADIUS Access-Reject packets, including both valid and invalid
packets, which were received from this server.
Access Challenges—The number of RADIUS Access-Challenge packets, including both valid and
invalid packets, which were received from this server.
Malformed Access Responses—The number of malformed RADIUS Access-Response packets
received from this server. Malformed packets include packets with an invalid length. Bad authenticators
or signature attributes or unknown types are not included as malformed access responses.
Bad Authenticators—The number of RADIUS Access-Response packets containing invalid
authenticators or signature attributes received from this server.
Pending Requests—The number of RADIUS Access-Request packets destined for this server that have
not yet timed out or received a response.
Timeouts—The number of authentication timeouts to this server.
Unknown Types—The number of RADIUS packets of unknown types, which were received from this
server on the authentication port.
Packets Dropped—The number of RADIUS packets received from this server on the authentication port
and dropped for some other reason.

TACACS+ Commands

FTOS supports Terminal Access Controller Access Control System (TACACS+) as another method for
administrator login authentication. This section contains these commands:
•
•
•
•
•
•
•
•
•
tacacs-server host
Configure a TACACS+ server and enter into TACACS+ Configuration mode.
tacacs-server host on page 205
tacacs-server key on page 206
tacacs-server timeout on page 207
key on page 207
port on page 207
priority on page 208
single-connection on page 208
show tacacs on page 208
timeout on page 209
Security Commands | 205