Ip Igmp Version; Ip Igmp Startup-Query-Interval - Dell Force10 S2410-01-10GE-24P Command Reference Manual

The range for count is 1 to 20.
The no ip igmp startup-query-count command resets the number of Queries sent out on startup,
separated by the Startup Query Interval on the interface to the default value.
Default
2
Mode Interface Config; Interface VLAN
Command
Version 2.3
History

ip igmp startup-query-interval

This command sets the interval between general queries sent by a querier on startup on the interface or
VLAN.
ip igmp startup-query-interval interval
Syntax
The range for interval is 1 to 300 seconds.
The no ip igmp startup-query-interval command resets the interval between general queries sent
by a querier on startup on the interface to the default value.
Default 31
Mode
Interface Config; Interface VLAN
Command
Version 2.3
History

ip igmp version

This command configures the version of IGMP for an interface or VLAN.
[no] ip igmp version version
Syntax
The value for version is either 1, 2 or 3 (for IGMP version 1, 2, or 3, respectively)
The no version of this com
reset to the default value.
Default 3
Mode Interface Config;
Command
Version 2.3
History
Modified: Added Interface VLAN mode.
Modified: Added Interface VLAN mode.
mand resets the version of IGMP for this interface.The version is
Interface VLAN
Modified: Added Interface VLAN mode.
IP Multicast Commands | 475