gmrp interfacemode enable (LAG)
Syntax
Default
Mode
Command
History
Related
Commands
igmp enable
igmp fast-leave
igmp groupmembership-interval
igmp mcrtexpiretime (interface)
|
LAG/Port Channel Commands
294
This command enables GARP Multicast Registration Protocol (GMRP) on the selected LAG. If an
interface with GARP enabled is enabled for routing or is enlisted as a member of the LAG (port
channel), GARP functionality will be disabled on that interface. GARP functionality will subsequently
be re-enabled on that interface if routing is disabled and port-channel (LAG) membership is removed
from the interface.
gmrp interfacemode enable
Use no gmrp interfacemode enable to disable GMRP on the LAG.
disabled
Interface Port Channel Config
Version 2.5.1
Introduced in the new Interface Port Channel Config mode
gmrp interfacemode enable all
show gmrp configuration
This command is available in the Interface Port Channel Config mode.
See
igmp enable (interface) on page 274
This command is available in the Interface Port Channel Config mode.
See
igmp fast-leave on page 275
This command is available in the Interface Port Channel Config mode.
See
igmp groupmembership-interval on page 275
This command is available in the Interface Port Channel Config mode.
See
igmp groupmembership-interval on page 275
Enable GMRP on all interfaces.
Display GMRP information for one or all interfaces.
in the IGMP chapter.
in the IGMP chapter.
in the IGMP chapter.
in the IGMP chapter.