Rip Commands - Dell Force10 S2410-01-10GE-24P Command Reference Manual

RIP Commands

This chapter provides a detailed explanation of the Routing Information Protocol (RIP) commands.
The commands are divided by functionality into the following different groups:
•
•
This chapter provides details on the following commands:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
auto-summary
This command enables the RIP auto-summarization mode.
[oe] WCe6nW,, sI
Syntax
The oe version of this command disables the RIP auto-summarization mode.
Default
enabled
Mode Router RIP Config
Show commands are used to display switch settings, statistics and other information.
Configuration Commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
auto-summary on page 449
default-information originate (RIP) on page 450
default-metric (RIP) on page 450
distance rip on page 450
distribute-list out on page 450
enable (RIP) on page 451
ip rip on page 451
ip rip authentication on page 451
ip rip receive version on page 452
ip rip send version on page 452
hostroutesaccept on page 453
split-horizon on page 453
redistribute on page 453
show ip rip on page 454
show ip rip interface brief on page 455
show ip rip interface on page 455
24
RIP Commands | 449