Ip Ospf Authentication; Ip Ospf Authentication-Key - Dell Force10 S2410-01-10GE-24P Command Reference Manual

ip ospf authentication

This command enables you to select either no or simple OSPF authentication for the specified
interface. If simple authentication is selected, you then select a plain-text key.
ip ospf authentication {none | simple key}
Syntax
The type is either none or simple. The key is composed of standard displayable, non-control
keystrokes from a standard 101/102-key keyboard and must be 8 bytes or less.
The no ip ospf authentication command sets the OSPF authentication type for the specified
interface to the default.
The default authentication type is none.
Default
Default The default password key is not configured. Unauthenticated interfaces do not need an authentication
key.
Mode Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
Version 2.3
History
Related
interface range
Commands
interface vlan

ip ospf authentication-key

ip ospf authentication-key
This command sets the OSPF MD5 authentication key and key ID for the specified interface.
ip ospf authentication-key key keyid
Syntax
The key is the MD5 authentication key, which must be 8 bytes or less and composed of standard
displayable, non-control keystrokes from a standard 101/102-key keyboard.
The keyid range is 0 to 255.
To set the OSPF MD5 authentication key for the specified interface to the default of none, use the no
ip ospf authentication-key command.
Default The default password key is not configured. Unauthenticated interfaces do not need an authentication
key.
Default The default keyid is not configured. Unauthenticated interfaces do not need an authentication key ID.
Mode Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Added Interface Range and Interface VLAN modes.
ip ospf authentication
Modified: Separated
authentication ip ospf authentication-key
and
parameter.
Defines an interface range and accesses the Interface Range mode
Creates a VLAN or selects an existing one and enters the Interface VLAN
mode.
Sets the OSPF authentication key for the specified interface.
ip ospf
into two commands—
encrypt
, and removed
OSPF Commands | 433
as a