Show Interface Switchport - Dell Force10 S2410-01-10GE-24P Command Reference Manual

show interface switchport

This command displays a summary of statistics on Layer 2 interfaces.
show interface switchport
Syntax
Mode Privileged Exec
The display parameters of show interface, when the argument is switchport, are as follows:
Usage
Information
Table 5-10. Fields in Output of show interface switchport Command
Field
Packets Received Without Error
Broadcast Packets Received
Packets Received With Error
Packets Transmitted Without Error
Broadcast Packets Transmitted
Transmit Packet Errors
Address Entries Currently In Use
VLAN Entries Currently In Use
Time Since Counters Last Cleared
Related
ip address (management)
Commands
show interface
show interface
managementethernet
show interface ethernet
show interfaces
show interfaces
This command displays information about a selected interface or VLAN.
Description
The total number of packets (including broadcast packets and
multicast packets) received by the processor.
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast
packets.
The number of inbound packets that contained errors
preventing them from being deliverable to a higher-layer
protocol.
The total number of packets transmitted out of the interface.
The total number of packets that higher-level protocols
requested to be transmitted to the Broadcast address,
including those that were discarded or not sent.
The number of outbound packets that could not be
transmitted because of errors.
The total number of Forwarding Database Address Table
entries now active on the switch, including learned and static
entries.
The number of VLAN entries presently occupying the VLAN
table.
The elapsed time, in days, hours, minutes, and seconds since
the statistics for this switch were last cleared.
Configures the IP address of the management interface.
Displays statistics for a specific port.
Displays information about the management interface.
Displays detailed statistics for a specific ethernet port or for all CPU traffic
based upon the argument.
Displays information about a selected interface or VLAN
System Management Commands | 59