Show Logging - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Syntax
Parameters
Mode
Command
History
Usage
Information
Example
Related
Commands

show logging

Related
Commands
| System Management Commands
60
show interfaces {cos-queue [ unit/slot/port ] | description
port-channel { 1-128 | brief} | switchport unit/slot/port 0-2 }
cos-queue
[
unit/slot/port
description
unit/slot/port
{
}
1-3965
port-channel brief
{ |
1-128
switchport unit/slot/port 0-2
Privileged Exec
Version 2.3
Modified: Added
The following example shows sample output of the show interfaces description command with
an interface specified in the unit/slot/port form:
Figure 5-14. Output of the show interfaces description Command
Force10#show interfaces description 1/0/1
Interface.......1/0/1
IfIndex.........1
Description.....1/0/1 is access port
MAC Address.....00:01:E8:D5:BA:C0
Bit Offset Val..1
show interface
show interfaces cos-queue
show ip interface
Note: See the various versions of the show logging command in the Syslog chapter,
as linked, below
show logging eventlog
show logging
show logging hosts
] (OPTIONAL) For details on this option, see
cos-queue on page
| (OPTIONAL) Enter the keyword
interface in the form
Alternatively, enter a VLAN ID to display information for that
VLAN (must be a VLAN enabled for routing).
See show interfaces port-channel on page
}
(OPTIONAL) Enter the interface ID and an integer between 0–2,
identifying the protected port group. See
page 304.
description
[
unit/slot/port
Displays statistics for a specific port or port channel (LAG).
Displays the class-of-service queue configuration for the specified interface.
Displays summary information about IP configuration settings for all ports in
the router.
Displays a combination of the system log and event log (buffered log).
Displays buffered logging (the System log)
Displays configured logging hosts (syslog servers.
} |
{ |
unit/slot/port 1-3965
show interfaces
334.
description
followed by the
unit/slot/port.
303.
show port-channel brief on
]
parameter.