Show Ip Ospf Interface Brief; Show Ip Ospf Interface Stats - Dell Force10 S2410-01-10GE-24P Command Reference Manual

OSPF Interface Type—Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast'.
The OSPF Interface Type will be 'broadcast'.
State—The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router, and
backup designated router. This is the state of the OSPF interface.
Designated Router—Is the router ID representing the designated router.
Backup Designated Router—Is the router ID representing the backup designated router.
Number of Link Event—The number of link events.
Metric Cost—Is the cost of the ospf interface. This is a configured value.

show ip ospf interface brief

This command displays brief information for the IFO object or virtual interface tables. This command
takes no options.
show ip ospf interface brief
Syntax
Mode Privileged Exec and User Exec
Report Fields
Unit/Slot/Port—Valid unit, slot and port number separated by forward slashes.
OSPF Admin Mode—States whether OSPF is enabled or disabled on a router interface. This is a
configured value.
OSPF Area ID—Represents the OSPF Area Id for the specified interface. This is a configured value.
Router Priority—A number representing the OSPF Priority for the specified interface. This is a
configured value.
Hello Interval—A number representing the OSPF Hello Interval for the specified interface. This is a
configured value.
Dead Interval—A number representing the OSPF Dead Interval for the specified interface. This is a
configured value.
Retransmit Interval—A number representing the OSPF Retransmit Interval for the specified interface.
This is a configured value.
Transit Delay Interval—A number representing the OSPF Transit Delay for the specified interface. This
is a configured value.
LSA Ack Interval—A number representing the OSPF LSA Acknowledgement Interval for the specified
interface.

show ip ospf interface stats

This command displays the statistics for a specific interface. The information below will only be
displayed if OSPF is enabled.
OSPF Commands | 443