Time Commands; System Clock Commands - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Time Commands

Use the commands in this chapter to configure and monitor time and date on the switch. You can
manually set the system clock or use SNTP (see
•
•
•
•
•
•
•
•
•
•
•
•

System Clock Commands

clock time
This command manually sets the system clock, configuring the date and/or time.
OgeORuCa,E
Syntax
Enter the date in dd/mm/yyyy format (for example, 10/01/2007 for October 1, 2007) or the time in
hh:mm:ss format (for example, 22:45:00, for 10:45 P.M.).
Default
If you enter only one parameter (either date or time), leaving the other parameter unchanged, the
unchanged parameter continues to be based on the previous command execution.
Mode
Global Config
Command
Version 2.5.1.0
History
show clock
This command is used to display clock settings and status.
show clock
Syntax
clock time on page 243
show clock on page 243
sntp broadcast client poll-interval on page 244
sntp client mode on page 245
sntp client port on page 245
sntp unicast client poll-interval on page 245
sntp unicast client poll-timeout on page 246
sntp unicast client poll-retry on page 246
sntp server on page 246
show sntp on page 247
show sntp client on page 248
show sntp server on page 248
u { dd/mm/yyyy | hh:mm:ss }
Introduced
SNTP Commands on page
14
244).
Time Commands | 243