Report Fields
|
System Logs
178
Number of Traps since last reset—The number of traps that have occurred since the last reset of this
device.
Number of Traps since log last displayed—The number of traps that have occurred since the traps were
last displayed. Getting the traps by any method (terminal interface display, upload file from switch, etc.)
will result in this counter being cleared to 0.
Log—The sequence number of this trap.
System Up Time—The relative time since the last reboot of the switch at which this trap occurred.
Trap—The relevant information of this trap.
The log messages appear after the summary statistics. The table consists of three columns — Log
(sequential number), System Up Time, and Trap.
Note:
Trap log information is not retained across a switch reset.
Note:
Traps are replicated in the System log, denoted by the "TRAPMGR" component name
and "traputil.c" as the file name.